Karlo
11-16-2008, 11:13 AM
MEV Sonic7 & Rocket
Including all the following components;
Fully triangulated space frame chassis 2mm wall, designed to 330 ft lbs of torque. 1.5" & 1"
Full set of wishbones
Full set of ball joints
Full set of suspension bushes and insert tubes
Four adjustable shock absorbers GAZ GT 13" www.gaz-shocks.co.uk (http://www.gaz-shocks.co.uk)
Four coil over springs 200 lbs Front, 300 lbs Rear
Pair of rear uprights to take Focus hubs/bearings/calipers
Wheel pattern 4 x 108 offset, 40mm & 25mm spacer rear with 12mm standard Ford offsets.
Pair of rear camber adjusters
Alloy floor panel cut to size 2mm
Alloy front bulkhead cut to size
Alloy rear bulkhead cut to size and folded
Alloy 8 Gallon fuel tank to take Focus pump/sender
Locking Petrol Cap
Two alloy pipes to extend to front mounted radiator
Front and rear grille mesh
Two GRP side panels
GRP engine cover
GRP hood
GRP front grille
GRP rear panel
GRP dash board
Four GRP Fenders
Two rear Fender brackets
Two front Fender brackets
Perspex fly screen cut to size
New Steering rack
Pair of steering rack extensions
Used pair of front uprights with hubs, bearings
2x Graphics for Side Panels, Any Color
CD rom build guide
LHD USA Version
Rocket frame weight 76 kg
38" from the Floor of the Rocket to the top of the Roll Bar.
You will Need the following Donor Ford Focus , Duratec DOHC with MTX-75 Trans or Zetec DOHC with IB5 Trans
Engine/gear box/mounts
ECU and engine bay wiring harness.
Drive shafts (no modifications required for the IB5) MTX-75 small bearing mod
Hubs/bearings from the front to go on the back of your Sonic7
Rear discs/calipers (some have drums but calipers are available separately)
Radiator with fan and hoses (single fan non air con type) and header tank
Hand brake lever with gaiter and cables
Gear change cables
Steering column and switch gear
Fuel pump and fuel gauge sender
Wheels/Tires
Exhaust manifold and catalytic converter (silencer available, fits straight on)
Horn
Brake fluid reservoir, seat belts, number plate lights, nuts, bolts, screws, etc.
Specs
Suspension 2" drop and 2" bump = 4" of Travel
Turn angle is 30 degrees."Quick Rack" 2.4 turns lock to lock.
Weight is approx 60/40 with driver in place
Standard car fits 6' 5" driver.
Length 3125mm (approx 10' 3")- Width 1725mm (approx 05' 8")
Height 1125mm (approx 03' 8") - Wheel Base 2425mm (approx 08' 0")
5" of Road clearance
Max wheels are 17x7, tire size is 205-40-17 with standard Fenders
Total Car Weight 1000 lbs +
Options
Powder coat chassis & suspension parts
Roll bar (bolt to chassis)
Roof / Top with rear “window”
Glass Windscreen Sonic7
Glass Windscreen Frame: Rocket (1975 VW Beetle Cab glass, Buy local)
2 tone Color Color choice?____________
Pair of GRP seats, Color choice?____________
Lights/loom/fuses/relays/switches/etc. Head light 90mm round
Stainless steel exhaust Ford Zetec (excluding donor manifold)
Willwood pedal set with balance bar and 3 master cylinders: 340-3950 Wilwood Pedals
Front Aero Wings Color choice?____________
New Alloy Uprights with Alloy Hubs & Bearings (front pair / set)
Willwood 4 pot Calipers (front pair): 340-3950 Wilwood 4 pot Calipers
Powerlite Smart Pads (front set)
Brake Disks (grooved / vented front pair) Cross Drilled and Vented Disks
Custom Body Color
NEW FORD FOCUS FRONT / For the Rear HUB & BEARING ASSEMBLY: Timken mfg.
Fits Driver or Passenger Side Front Years: 2000 2001 2002 2003 2004 2005 2006 Ford Focus
See Factory link below,
www.mevltd.co.uk/ (http://www.mevltd.co.uk/)
Ford Focus Part Number 2000-2006 PDF File DownLoad (http://savefile.com/files/1755299)
Including all the following components;
Fully triangulated space frame chassis 2mm wall, designed to 330 ft lbs of torque. 1.5" & 1"
Full set of wishbones
Full set of ball joints
Full set of suspension bushes and insert tubes
Four adjustable shock absorbers GAZ GT 13" www.gaz-shocks.co.uk (http://www.gaz-shocks.co.uk)
Four coil over springs 200 lbs Front, 300 lbs Rear
Pair of rear uprights to take Focus hubs/bearings/calipers
Wheel pattern 4 x 108 offset, 40mm & 25mm spacer rear with 12mm standard Ford offsets.
Pair of rear camber adjusters
Alloy floor panel cut to size 2mm
Alloy front bulkhead cut to size
Alloy rear bulkhead cut to size and folded
Alloy 8 Gallon fuel tank to take Focus pump/sender
Locking Petrol Cap
Two alloy pipes to extend to front mounted radiator
Front and rear grille mesh
Two GRP side panels
GRP engine cover
GRP hood
GRP front grille
GRP rear panel
GRP dash board
Four GRP Fenders
Two rear Fender brackets
Two front Fender brackets
Perspex fly screen cut to size
New Steering rack
Pair of steering rack extensions
Used pair of front uprights with hubs, bearings
2x Graphics for Side Panels, Any Color
CD rom build guide
LHD USA Version
Rocket frame weight 76 kg
38" from the Floor of the Rocket to the top of the Roll Bar.
You will Need the following Donor Ford Focus , Duratec DOHC with MTX-75 Trans or Zetec DOHC with IB5 Trans
Engine/gear box/mounts
ECU and engine bay wiring harness.
Drive shafts (no modifications required for the IB5) MTX-75 small bearing mod
Hubs/bearings from the front to go on the back of your Sonic7
Rear discs/calipers (some have drums but calipers are available separately)
Radiator with fan and hoses (single fan non air con type) and header tank
Hand brake lever with gaiter and cables
Gear change cables
Steering column and switch gear
Fuel pump and fuel gauge sender
Wheels/Tires
Exhaust manifold and catalytic converter (silencer available, fits straight on)
Horn
Brake fluid reservoir, seat belts, number plate lights, nuts, bolts, screws, etc.
Specs
Suspension 2" drop and 2" bump = 4" of Travel
Turn angle is 30 degrees."Quick Rack" 2.4 turns lock to lock.
Weight is approx 60/40 with driver in place
Standard car fits 6' 5" driver.
Length 3125mm (approx 10' 3")- Width 1725mm (approx 05' 8")
Height 1125mm (approx 03' 8") - Wheel Base 2425mm (approx 08' 0")
5" of Road clearance
Max wheels are 17x7, tire size is 205-40-17 with standard Fenders
Total Car Weight 1000 lbs +
Options
Powder coat chassis & suspension parts
Roll bar (bolt to chassis)
Roof / Top with rear “window”
Glass Windscreen Sonic7
Glass Windscreen Frame: Rocket (1975 VW Beetle Cab glass, Buy local)
2 tone Color Color choice?____________
Pair of GRP seats, Color choice?____________
Lights/loom/fuses/relays/switches/etc. Head light 90mm round
Stainless steel exhaust Ford Zetec (excluding donor manifold)
Willwood pedal set with balance bar and 3 master cylinders: 340-3950 Wilwood Pedals
Front Aero Wings Color choice?____________
New Alloy Uprights with Alloy Hubs & Bearings (front pair / set)
Willwood 4 pot Calipers (front pair): 340-3950 Wilwood 4 pot Calipers
Powerlite Smart Pads (front set)
Brake Disks (grooved / vented front pair) Cross Drilled and Vented Disks
Custom Body Color
NEW FORD FOCUS FRONT / For the Rear HUB & BEARING ASSEMBLY: Timken mfg.
Fits Driver or Passenger Side Front Years: 2000 2001 2002 2003 2004 2005 2006 Ford Focus
See Factory link below,
www.mevltd.co.uk/ (http://www.mevltd.co.uk/)
Ford Focus Part Number 2000-2006 PDF File DownLoad (http://savefile.com/files/1755299)