Karlo
12-30-2007, 08:46 PM
Factory Engine mounts, Honda K20, GM Ecotec , Dodge SRT-4, Mit 4G63
~ Engine bay to accept almost any FWD drivetrain
~ Custom mounts available at extra cost.
~ 4 -17 x 9.5 inch wheels - 18 inch wheel option- C5 Corvette Z06 - no tires
~ 4 piston Wilwood calipers Forged Billet Dynalite calipers front & rear
~ 12.5 inch drilled rotors
~ Quick disconnect steering wheel
~ D.O.M. CNC bent steel chassis tubing - Tig welded
~ DOM tubing suspension steel - Tig welded
~ Shocks Carrera coilovers...double adjustable are also available as an upgrade.
~ Chromoly/teflon rod ends suspension
~ Choice of F1 or Retro body work in Black, dark Blue, Gulf Blue, White, Red, Orange, Yellow Green
~ Adjustable bucket seats
~ Collapsible steering column
~ Stainless steel. triple pedal assembly with master cylinder and brake bias
~ Aluminum fuel tank 10 Gallon
~ CNC billet uprights
~ Corvette wheel bearings
~ CV joint stub axles
~ Suzuki GSXR 1000 Side Mirrors with turn signals
~ Removable Rod End Rear Stays for Roll Hoops
~ Available in left-hand or right-hand drive
~ Seat Belt mounts included
~ T6061 Aluminum Floor Pan
~ T6061 Aluminum Engine Firewall
~ Chassis has in-built mounting points for all body panels.
~ Fiberglass housing / dash for the digital gauge cluster to fit into.
~ 96" wheel base, 72" wide
~ Removable torque bar with rod ends that attaches to chassis to rear engine mount
1300 LBS Fully Dressed with Engine, Trans & etc on average +-
Options
~Double Adjustable Shocks
~Roll Bar, Powder Coated Gray
~Windshield with wiper (not available yet)
Parts & prices are subject to change.
Needed Parts
Engine / ECU
GearBox
Engine Wire Harness
Tires for 17 x 9.5
Shifter Cables
Header / Muffler
FAQ
How do I purchase one of these rolling Kits?
Call RCR at 586-329-1573 and give them 50% deposit.
Do I have to send an Engine?
You do not have to send an Engine if you are using SRT-4, Ecotec, or Honda K series motors. RCR will fab your chassis to fit your desired engine. Any other type of engines consult with RCR.
Do I have to send Tires?
If you truly want your kit to be rolling you need to send RCR your Tires. The delivery Driver will thank you.
What is the delivery time?
Approximately 4-6 weeks.
Colors of the Body work?
The panels will be a buffable gelcoat finish just like our other cars...
Black
Dark blue
Gulf Blue
White
Red
Orange
Yellow
Green
What are the options?
Double adjustable shocks QA1
Rollbar (powder coated Gray same as the frame).
Windsheild with wiper (not available yet)
What is the expected ground clearance?
5 inches
Can I change some items to suit my needs and slow down the production line?
NO
~ Engine bay to accept almost any FWD drivetrain
~ Custom mounts available at extra cost.
~ 4 -17 x 9.5 inch wheels - 18 inch wheel option- C5 Corvette Z06 - no tires
~ 4 piston Wilwood calipers Forged Billet Dynalite calipers front & rear
~ 12.5 inch drilled rotors
~ Quick disconnect steering wheel
~ D.O.M. CNC bent steel chassis tubing - Tig welded
~ DOM tubing suspension steel - Tig welded
~ Shocks Carrera coilovers...double adjustable are also available as an upgrade.
~ Chromoly/teflon rod ends suspension
~ Choice of F1 or Retro body work in Black, dark Blue, Gulf Blue, White, Red, Orange, Yellow Green
~ Adjustable bucket seats
~ Collapsible steering column
~ Stainless steel. triple pedal assembly with master cylinder and brake bias
~ Aluminum fuel tank 10 Gallon
~ CNC billet uprights
~ Corvette wheel bearings
~ CV joint stub axles
~ Suzuki GSXR 1000 Side Mirrors with turn signals
~ Removable Rod End Rear Stays for Roll Hoops
~ Available in left-hand or right-hand drive
~ Seat Belt mounts included
~ T6061 Aluminum Floor Pan
~ T6061 Aluminum Engine Firewall
~ Chassis has in-built mounting points for all body panels.
~ Fiberglass housing / dash for the digital gauge cluster to fit into.
~ 96" wheel base, 72" wide
~ Removable torque bar with rod ends that attaches to chassis to rear engine mount
1300 LBS Fully Dressed with Engine, Trans & etc on average +-
Options
~Double Adjustable Shocks
~Roll Bar, Powder Coated Gray
~Windshield with wiper (not available yet)
Parts & prices are subject to change.
Needed Parts
Engine / ECU
GearBox
Engine Wire Harness
Tires for 17 x 9.5
Shifter Cables
Header / Muffler
FAQ
How do I purchase one of these rolling Kits?
Call RCR at 586-329-1573 and give them 50% deposit.
Do I have to send an Engine?
You do not have to send an Engine if you are using SRT-4, Ecotec, or Honda K series motors. RCR will fab your chassis to fit your desired engine. Any other type of engines consult with RCR.
Do I have to send Tires?
If you truly want your kit to be rolling you need to send RCR your Tires. The delivery Driver will thank you.
What is the delivery time?
Approximately 4-6 weeks.
Colors of the Body work?
The panels will be a buffable gelcoat finish just like our other cars...
Black
Dark blue
Gulf Blue
White
Red
Orange
Yellow
Green
What are the options?
Double adjustable shocks QA1
Rollbar (powder coated Gray same as the frame).
Windsheild with wiper (not available yet)
What is the expected ground clearance?
5 inches
Can I change some items to suit my needs and slow down the production line?
NO