TR - 42 Matrix Motor Werks

[Karlo]

Picture

[pook]

Well here she is. :clap:
The rest is all B-T!

PooK

[pook]

Thanks guys! I have had a blast with this project, and cant wait to go from concepts to cars!

I think with the flat four cars part of the look IS the engine, looking in and seeing those carbs or turbo and realizing how low the motor sits is part of the picture, If I cover it all that is gone, but I could be wrong?

The S wouldn't have room to cover anyway, and when the engine is built and clean and sorted it adds to the look.

The S also will have a scoop on top and like Marty says a few other surprises:clap:

Here is a pic of a wing, Its just mocked up with some rods we made to see how it looks at different heights until Bill gets the proper hardware.
The placement and wing style, brand, etc...is the owners choice (In our case Bill's) I can put mount tabs anywhere the customer likes.

We have plans for LOTS of different add ons for the TR-42's! different splitter styles, canards, cluster pods, sport windshields, etc... and since we may have finally found a fiberglass company I should have time now to develop some goodies to choose from :clap::clap::clap::clap:

PooK

[B-T]

Got the fenders painted and mounted (rattle can plus rattle can clear), finished the body fasteners, and got the signals working! The trick was to only use the hazard relay and not connect the relay for the in signal lighting to the relays. What a PITA! Anyway, gave the car a wash and cleaned it up a bit. Looking good I say! Now just going to go get an engine in a far away land in 10 days or so, I will pull the dummy engine and leave it with Pook for future fitting if needed.
:coolnana:
BT